Aquastorm 200 Inline Cleaning System

Aqueous Inline Wash Machine Features & Benefits

Manufacturer:  Speedline/Electrovert
Model:   Aquastorm 200
D.O.M.:   09/02
Reference No.:   371

Specifications:

BASIC SYSTEM   (440/480V, 3ph, 60hz) 20 in. (51cm)

STANDARD FEATURES:

  • Listed by Underwriters Laboratories (UL) and CE Compliant
  • One (1) piece construction
  • Scratch inhibiting textured gray polypropylene construction with tubular steel frame
  • Triple welded polypropylene liquid tanks
  • Stainless Steel plumbing with “Kwik Clamps” for wash, rinse, and fill lines
  • CPVC drain plumbing
  • High temperature shut-off switches in wash and dryer sections
  • Temperature controls via internal PC and thermocouple sensors
  • Hinged tempered glass viewing windows and splash shields
  • Front and rear removable covers
  • Over spray protection on wet modules
  • Single point utility connections
  • Emergency stop controls
  • Motor overload protection on pumps and blowers
  • Two (2) 10 in. (25.4 cm) exhaust stacks
  • Noise suppression package < 80 dba at the exit end of the machine
  • Gravity cascade

System Controls:

  • System functions controlled by personal computer
  • Custom operator keypad and multi-line LCD display with LED bar graphs
  • Liquid level tank height sensors displayed on the control panel
  • Auto fill and drain solenoid valve controls on control panel
  • Programmable process set point alarms
  • High / low water level protection alarms
  • Auto start seven (7) day programmable timer
  • Open function keys for future expandability
  • Emergency condition source identification
  • Front mounted stainless steel pressure gauges for all wet sections

CONVEYOR MODULE

  • 20 in. (51 cm) width stainless steel mesh belt
  • Conveyor tensioning with safety clutch
  • PC closed loop conveyor speed control

Conveyor Controller:

  • 1/8 HP 90 V. DC motor
  • Multidirectional chain drive with jam alert

PREWASH MODULE

  • 14 in. (36 cm) section
  • Two (2) upper and lower stainless steel spray bars with staggered nozzles
  • Valve switching to divert pre-wash to drain or wash sump

HEATED RECIRCULATING WASH MODULE

  • 48 in. (122 cm) section
  • Four (4) upper and lower stainless steel spray bars
  • 80 gallon (303 liter) sump tank with slanted bottom for efficient draining
  • Two (2) 16 kW (32 kW tot) Immersion heaters w/ over temperature safety circuits
  • Heavy duty stainless steel tank lid with gasket seal
  • Automatic fill and drain solenoid valves
  • Easy access to collection screen, pump inlet filters, float switches and heating elements
  • Slide out stainless steel tank collection screen and stainless steel pump inlet filters
  • Pre-plumbed to accept Hurricane Jet™ upgrade

CHEMICAL ISOLATION (DRAG-OUT) MODULE                                                 

  • 36 in. (91 cm) dwell zone

HEATED RECIRCULATING RINSE MODULE

  • 48 in. (122 cm) section
  • Four (4) upper and lower stainless steel spray bars
  • 50 gallon (189 liter) sump tank with slanted bottom for efficient draining
  • Two (2) 16 kW (32 kW tot) Immersion heaters w/ over temperature safety circuits
  • Heavy duty stainless steel tank lid with gasket seal
  • Automatic fill and drain solenoid valves
  • Easy access to collection screen, pump inlet filters, float switches and heating elements
  • Slide out stainless steel tank collection screen and stainless steel pump inlet filters
  • Pre-plumbed to accept Hurricane Jet™ upgrade

FINAL RINSE MODULE

  • 17 in. (43 cm) section
  • Two (2) upper and lower stainless steel spray bars with staggered nozzles
  • Upper and lower stainless steel manifold control valves

DRYER MODULES

  • Two (2) thermocouple sensors temperature monitors with LCD readout

Blower Drying Station #1

  • 30 in. (76 cm) section
    • Two (2) stainless steel adjustable upper air knives
    • One (1) stainless steel fixed lower air knife
  • 5 HP high velocity/high volume centrifugal blower

Blower Drying Station #2

  • 30 in. (76 cm) section
    • Two (2) stainless steel adjustable upper air knives
    • One (1) stainless steel fixed lower air knife
  • 7.5 HP high velocity/high volume centrifugal blower

Click images below for enlarged view of the Speedline Aquastorm PCB Cleaning System

Purchase or Ask About This Equipment
* indicates required field