Speedline Electrovert Omni Excel 7 Reflow Oven

Make:  Speedline
Model: Electrovert Omni Excel 7
Reference No.:   172CC
Vintage:  2008
Details:
  • 7 Heating Zones (Top & Bottom Heaters)
  • 2 Cooling Zones
  • Edge & Mesh Transport
  • Power: 480 VAC; 74.5A; 60Hz; 3 Phase
  • Machine Dimensions: 202″ x 60″ x 58″
  • Lead Free
  • Combo Conveyor
 
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

Speedline Momentum Elite 2008

Make:  Speedline
Model: Momentum Elite
Reference No.:   172CC
Vintage:  2008
Details:
  • Automated Paste Dispenser (supports 6 oz. & 12 oz. cartridges)
  • Laser Paste Bead Height Sensor
  • Adjustable Stencil Shelves
  • (Note: Supports stencils with outside dimension of 23″ or larger) 
  • Pad Coverage Inspection EA
  • Contrast Based 2D Inspection (paste on pad)
  • Momentum Elite Package
  • 6 Second Cycle Time
  • Triple Track Conveyor System (66″ Track Length). With Servo Driven Vision X, Y and Z Axes.
 
Programmable squeegee print head
Stencil Wiper with Vacuum and Solvent
Digital probe with telecentric optics, ultrasonic board stop sensor, and LED flash lighting
IR Light – Enhances Inspection Recognition for OSP Boards
+/- 12.5 micron total process alignment repeatability and +/- 25.0 micron wet print accuracy
CanOpen control architecture for parallel processing
Automatic Stencil Positioning
Programmable Board Stop (Hardstop and Non-Contact Stop included)
Centernest clamping includes: Fixed top clamps and centernest vacuum hold-down
Front Fixed Single Tracks
Board thickness range of 0.2mm to 5mm
3mm board edge clearance capability
50.8mm X 50.8mm (2″ X 2″) to 609.6mm X 508mm (24″ X 20″) board size capability (X, Y)
Windows XP based Benchmark GUI software (both registered trademarks)
737mm X 737mm (29″ X 29″) Stencil chase
Signal Light Tower
17″ flat panel display
PC controlled with keyboard and trackball interface
SPC data collection
SMEMA handshake, Ethernet communication and CE certification
208V / 240V single phase power
GridLoc System
 
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
 
Condition:  Complete & Operational
Location & Shipping:  USA / FOB Origin
Actual Machine Photos:

TestEquity Temperature Chamber

Make: TestEquity
Model:  Temperature Chamber
Reference No.:   171CC
Details:

Temperature, Lowest:  -35°C
Temperature, Highest:  +175°C
LN2 Boost Cooling:  No
Interior Volume:  27 Cu Ft
Input Voltage:  208V, 60Hz, 3 PH

  • -35°C to +175°C Temperature Range (opt. to +205°C)
  • 27 Cu Ft Workspace, 40 W x 32 H x 36.5 D (765 liters)
  • Choice of Original F4 Controller or Optional F4T Touch Screen Controller
  • High/Low Limit Control and Alarm
  • Viewing Window & Interior Light
  • 4″ Access Ports on Left & Right Side
  • Non-CFC Single-Stage Refrigeration
  • Scroll Compressors for Quiet and Efficient Operation
  • 3 Year Parts, 1 Year Labor warranty
  • Fast Delivery From Stock
  • Made by TestEquity in Moorpark, California

Pillarhouse Jade S-200

Make: Pillarhouse
Model:  Jade S-200
DOM: Vintage 2009
Reference No.:   170CC
Details:

Product installation requirements:

Facilities: 208V – 250V 50/60Hz 4kVA
Dimms: 55″ x 40″ x 53″

Configuration

• Universally Adjustable Tooling Carrier 
• Inerted Nitrogen System 
• Lead Free Capability (Titanium solder pot and pump assembly) 
• Solder Wire Feeder with Solder bath level sensor 
• Drop Jet Fluxer 
• Programming Camera 
• PillarCOM Windows Software 
• Internal Fume Extraction
• Integral PC with Machine Mounted Flat Screen Monitor 


Description

As part of the entry-level philosophy for this system, a low maintenance solder bath and pump mechanism has been developed which moves in three axes of movement whilst not limiting access to the PCB. Solder is applied using proven technology through our AP nozzle design or custom specialised nozzles, incorporating patented spiral solder return to bath technology offering reduced solder balling potential.

As with all Pillarhouse systems, the soldering process is enhanced by a hot Nitrogen curtain which provides an inert atmosphere. This method of soldering also assists in the prevention of oxidisation and provides a local preheat to the joint, thus reducing thermal shock to localised components.

The Jade MKII is controlled by a PC, through PillarCOMM, a Windows® based ‘Point & Click’ interface with PCB image display.  Additionally, our PillarPAD offline package allows the operator to produce programs independently from the machine using Gerber data.


Specifications

Height: 1403mm / 55” – excluding light stack
Width: 1000mm / 40“
Depth: 1351mm / 53”
Board size: 457mm x 508mm / 18”x 20” (larger PCB size available upon request)
Edge clearance: Above / below 3mm
Height clearance: Above / below 40mm nominal
Above 190mm – special application
Solder: Most commonly used solder types – including lead-free
Solder pot capacity: 8kg
Applicators: AP style – 2.5mm to 16mm dia.
   Extended AP style – 2.5mm to 20mm dia.
   Micro nozzle – 1.5mm to 2.5mm
   Jet-Tip style – 6mm to 20mm dia.
   Jet-Wave nozzle – up to 25mm width
   Special dedicated nozzles available upon request
Flux: Low maintenance Drop-Jet system. Low solids (below 8%), no clean flux, pressurised and inerted system, optional water soluble system available
X, Y & Z Axis resolution: 0.1mm
Repeatability: +/- 0.05mm
Nitrogen usage: 35 litres gas/min. 5 bar pressure
Nitrogen purity: 99.995% or better
Air supply pressure: 5 bar / 72 psi
Power supplies: Single phase + PE
Voltage: 208V – 250V
Frequency: 50/60Hz
Power: 4kVA
Power with IR preheat: 6.5kVA – Top-side
   8kVA – Top with bottom-side ring heater
Transport: Hand load
Tooling: Integral adjustable board guides, includes finger extensions and board clamps
Programming: PillarCOMM Windows based ‘Point & Click’ interface

Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Nordson DAGE XD7600NT Diamond

Make: Nordson
Model:  DAGE XD7600NT Diamond
Reference No.:   169CC
Details:
 
The unique Nordson DAGE NT maintenance-free, sealed transmissive type of X-ray tube provides 0.1 µm feature recognition and up to 10 W of power.  Plus, the 2 Mpixel XiDAT3 digital image detector make this jewel of a system the choice for the highest performance and highest magnification imaging tasks.
 

Diamond X-Ray Advantages

* Nordson DAGE NT100 Maintenance-Free, Sealed-Transmissive X-ray Tube
* Nordson DAGE revolutionary new X-Plane™ option which uses a proprietary, patent applied for,   
  tomosynthesis, or CT technique to create 2D X-ray slices in any plane of a printed circuit board assembly 
  without the need to cut the board.
* Provable < 0.1 µm Feature Recognition
* 160 kV Tube with up to 10 W Tube Power – Always Retains Sub-Micron Ability
* Nordson DAGE 2 Mpixel @ 25fps XiDAT3 Digital Image Intensifier with Real Time Image Enhancements
* Geometric Magnification 2,000 X, System 12,000 X and Total 60,000 X with Digital Zoom
* 29” x 22.8” (736 x 580 mm) Maximum Board Size
* 70° Oblique Views without Loss of Magnification
* AXiS – Active X-ray Image Stabilization and 24”
* Primary and Secondary TFT LCD Monitors
* Highest Magnification Imaging and Extended System and Tube Warranty as Standard
* Option: µCT (3D Inspection)

 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

450 Universal Gold Feeders

Manufacturer:    Universal
Model
D.O.M.:
Reference No.:   G07

Specifications:

Size
Count
8
338
12
47
16
27
24
22
32
17
44
22
56
4
72
2
88
1
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Invalid Displayed Gallery

Universal Instruments Segment Buffer Conveyor

Make: Universal Instruments
Model:  Segment Buffer Conveyor
Reference No.:   168CC
Details:
 
Universal Instruments 2 Segment Buffer Conveyor
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:
 

Universal Instruments Multi-Magazine Loader

Make: Universal Instruments
Model:  Multi-Magazine Loader
Reference No.:   167CC
Details:
 
Universal Instruments Multi-Magazine Loader
end of the line loader
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:

Universal Instruments Push Conveyor Multi-Magazine Loader

Make: Universal Instruments
Model:  Push Conveyor Multi-Magazine Loader
Reference No.:   166CC
Details:
 
Universal Instruments Push Conveyor
for end of the line multi-magazine loader
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos:
 

Conveyors Technologies Rotating Sorting Conveyor

Make: Conveyors Technologies 
Model:  Rotating Sorting Conveyor
Reference No.:   165CC
Details:
 
Conveyors Technologies Rotating Sorting Conveyor
 
Condition:  Complete and  Operational
Location & Shipping:  USA / FOB Origin
Contact Brad at the number above or email brad@cardinalcircuit.com for additional information or inquiries.
Photos: